FEATURES of LCP MARK-IV
A.THE APARATUS :
Tubular Rigid Steel section duly powder coated with rear system wheel. Sufficient space provided at the top level of Lower Drawer along with Guarded Table Top Steel Tray. Top Tray provided at eye level for keeping Monitoring Equipments. Four antistatic Castor wheels with brake have been fitted for easy mobility.
B. ATTACHMENT :
-i) Rotameters: 230 mm long accurately Calibrated Rotating Bobbing Flowmeters.
Oxygen : 100 ml / min to 8 LPM & Nitrous Oxide : 200ml / min to 12 LPM
-ii) Ether: Eather vaporizer with Bottle (50 cc to 300 cc) supplied as standard accessories. Goldman vaporizer may be provided as per customer’s choice.
-iii) Non-Return-cum-Pressure Relief valve: Blow off excess pressure in the circuit. Release pressure 100 CM H2O+10% , H2O-10%.
-iv) Change over Unit: Emergency oxygen Flush Button is provided at table Top Level on the front . flow range 35 LPM calibrated to 60 PSI (+5,-5)
-v) Regulator: 2 No's Nitrous Oxide Regulator (cut off facility) & 2 No's Oxygen Preset Regulator, been provided with 2 No's Nitrous Oxide & 2 No's Oxygen pressure gauge(2.5” ф) fixed on bend gauge post.
-iv) Alarm: Oxy failure alarm, if flow of oxygen (02) goes flow below 2.5 LPM
C. PATIENT CIRCUIT : 1.Bag mount, 2.Rebreathing Bag (2 ltrs), 3.Corrugated Tube (Anti static), 4.Expiratory Valve, 5.Angle Mount, 6.Catheter Mount, 7.Face Mask (Adult & child) with tube, 8.Adopted Plug In Hose.
D. OPTIONAL : Circle absorber System : Twin Canister Circle Absorber System is provided with Swiveling facility. Canisters & inspiratory valve have quick - fit Tapper fitting with Rubber ‘O’ Ring for leak proof seal & easy maneuver ability. Bag Mount & APL valve Assembly have swivel arms for easy accessibility.
E. WARNINGS : Hypoxic mixture may be deliver from the system when gasses other than oxygen, nitrous oxide are used .
Call us at: (+)91-33-24532467
 | ||||||
| LCP MARK-IV |
This comment has been removed by the author.
ReplyDelete